Supermolecular Confined Silicon Phosphorescence Nanoprobes for Time-Resolved Hypoxic Imaging Analysis.

Room temperature phosphorescence (RTP) nanoprobes play crucial roles in hypoxia imaging due to their high signal-to-background ratio (SBR) in the time domain. However, synthesizing RTP probes in aqueous media with a small size and high quantum yield remains challenging for intracellular hypoxic imaging up to present. Herein, aqueous RTP nanoprobes consisting of naphthalene anhydride derivatives, cucurbit[7]uril (CB[7]), and organosilicon are reported via supermolecular confined methods. Benefiting from the noncovalent confinement of CB[7] and hydrolysis reactions of organosilicon, such small-sized RTP nanoprobes (5-10 nm) exhibit inherent tunable phosphorescence (from 400 to 680 nm) with microsecond second lifetimes (up to ∼158.7 µs) and high quantum yield (up to ∼30%). The as-prepared RTP nanoprobes illustrate excellent intracellular hypoxia responsibility in a broad range from ∼0.1 to 21% oxygen concentrations. Compared to traditional fluorescence mode, the SBR value (∼108.69) of microsecond-range time-resolved in vitro imaging is up to 2.26 times greater in severe hypoxia (<0.1% O2), offering opportunities for precision imaging analysis in a hypoxic environment.

Optimization of Newtonian fluid pressure in microcantilever integrated flexible microfluidic channel for healthcare application.

The demand for microfluidic pressure sensors is ever-increasing in various industries due to their crucial role in controlling fluid pressure within microchannels. While syringe pump setups have been traditionally used to regulate fluid pressure in microfluidic devices, they often result in larger setups that increase the cost of the device. To address this challenge and miniaturize the syringe pump setup, the researcher introduced integrated T-microcantilever-based microfluidic devices. In these devices, microcantilevers are incorporated, and their deflections correlate with the microchannel's pressure. When the relative pressure of fluid (plasma) changes, the T-microcantilever deflects, and the extent of this deflection provides information on fluid pressure within the microchannel. In this work, finite element method (FEM) based simulation was carried out to investigate the role of material, and geometric parameters of the cantilever, and the fluid viscosity on the pressure sensing capability of the T-microcantilever integrated microfluidic channel. The T-microcantilever achieves a maximum deflection of 127µm at a 5000µm/s velocity for Young's modulus(E) of 360 kPa of PDMS by employing a hinged structure. On the other hand, a minimum deflection of 4.05 × 10-5µm was attained at 5000µm/s for Young's modulus of 1 TPa for silicon. The maximum deflected angle of the T-cantilever is 20.46° for a 360 kPa Young's modulus while the minimum deflection angle of the T-cantilever is measured at 13.77° for 900 KPa at a fluid velocity of 5000µm s-1. The T-cantilever functions as a built-in microchannel that gauges the fluid pressure within the microchannel. The peak pressure, set at 8.86 Pa on the surface of the cantilever leads to a maximum deflection of 0.096µm (approximately 1µm) in the T-cantilever at a 1:1 velocity ratio. An optimized microfluidic device embedded with microchannels can optimize fluid pressure in a microchannel support cell separation.

Ultrasensitive 3D Stacked Silicon Nanosheet Field-Effect Transistor Biosensor with Overcoming Debye Shielding Effect for Detection of DNA.

Silicon nanowire field effect (SiNW-FET) biosensors have been successfully used in the detection of nucleic acids, proteins and other molecules owing to their advantages of ultra-high sensitivity, high specificity, and label-free and immediate response. However, the presence of the Debye shielding effect in semiconductor devices severely reduces their detection sensitivity. In this paper, a three-dimensional stacked silicon nanosheet FET (3D-SiNS-FET) biosensor was studied for the high-sensitivity detection of nucleic acids. Based on the mainstream Gate-All-Around (GAA) fenestration process, a three-dimensional stacked structure with an 8 nm cavity spacing was designed and prepared, allowing modification of probe molecules within the stacked cavities. Furthermore, the advantage of the three-dimensional space can realize the upper and lower complementary detection, which can overcome the Debye shielding effect and realize high-sensitivity Point of Care Testing (POCT) at high ionic strength. The experimental results show that the minimum detection limit for 12-base DNA (4 nM) at 1 × PBS is less than 10 zM, and at a high concentration of 1 µM DNA, the sensitivity of the 3D-SiNS-FET is approximately 10 times higher than that of the planar devices. This indicates that our device provides distinct advantages for detection, showing promise for future biosensor applications in clinical settings.

Green separation and decomposition of crystalline silicon photovoltaic module's backsheet by using ethanol.

The treatment and recycling of discarded crystalline silicon photovoltaic modules (c-Si PV modules) has become a research focus, but few research have paid attention to the standardized treatment of c-Si PV module's fluorinated backsheet. Improper management of fluorinated backsheet can pose ecological and human health risks. Therefore, this study presents a novel method for processing the backsheet. The proposed approach entailed the utilization of ethanol (CH3CH2OH) to separate the backsheet from the PV module. Subsequently, the separated backsheet underwent decomposition using an alkaline ethanol (NaOH-CH3CH2OH) solution. Finally, the backsheet was recovered in the form of terephthalic acid (TPA) with a purity of 97.47 %. This recovered TPA can then serve as a valuable raw material for producing new backsheets, fostering a closed-loop material circulation. Experimental results demonstrate that immersing the PV module in a 75 % CH3CH2OH-H2O solution at a temperature of 343 K for 30 min achieved 100 % separation of the backsheet. Furthermore, subjecting the separated backsheet to a 60 min reaction in an NaOH-CH3CH2OH solution with a temperature of 343 K and a NaOH concentration of 1.0 mol/L achieved complete decomposition. The reaction mechanism was analyzed through characterization methods such as SEM/EDS, NMR, FTIR and XRD. This method is efficient, non-toxic organic reagent-free and environmentally friendly, so it holds significant potential for further development in the field of c-Si PV module recycling.

Long-term effects of compound passivator coupled with silicon fertilizer on the reduction of cadmium and arsenic accumulation in rice and health risk evaluation.

Cadmium (Cd) and arsenic (As) are precedence-controlled contaminants in paddy soils, that can easily accumulate in rice grains. Limestone and sepiolite (LS) compound passivator can obviously reduce Cd uptake in rice, whereas Si fertilizer can effectively decrease rice As uptake. Here, the synergistic effects of the LS compound passivator coupled with Si fertilizer (LSCS) on the soil pH and availability of Si, Cd, and As, as well as rice grain Cd and As accumulation and its health risk were studied based on a 3-year consecutive field experiment. The results showed that the LSCS performed the best in terms of synchronously decreasing soil Cd and As availability and rice Cd and As uptake. In the LSCS treatments, soil pH gradually decreased with the rice-planting season, while soil available Cd and As contents gradually increased, suggesting that the influence of LSCS on Cd and As availability gradually weakened with rice cultivation. Nonetheless, the contents of Cd and inorganic As (i-As) in rice grains treated with LSCS were slightly affected by cultivation but were significantly lower than the single treatments of LS compound passivator or Si fertilizer. According to the Cd and As limit standards in food (GB2762-2022), the Cd and i-As content in rice grains can be lowered below the standard by using the 4500 kg/hm2 LS compound passivator coupled with 90 kg/hm2 Si fertilizer in soil and spraying 0.4 g/L Si fertilizer on rice leaves for at least three years. Furthermore, health risk evaluation revealed that LSCS treatments significantly reduced the estimated daily intake, annual excess lifetime cancer risk, and hazard quotient of Cd and i-As in rice grains. These findings suggest that LSCS could be a viable approach for reducing Cd and As accumulation in rice grains and lowering the potential health risks associated with rice.

Implantable pH Sensing System Using Vertically Stacked Silicon Nanowire Arrays and Body Channel Communication for Gastroesophageal Reflux Monitoring.

Silicon nanowires (SiNWs) are emerging as versatile components in the fabrication of sensors for implantable medical devices because of their exceptional electrical, optical, and mechanical properties. This paper presents a novel top-down fabrication method for vertically stacked SiNWs, eliminating the need for wet oxidation, wet etching, and nanolithography. The integration of these SiNWs into body channel communication (BCC) circuits was also explored. The fabricated SiNWs were confirmed to be capable of forming arrays with multiple layers and rows. The SiNW-based pH sensors demonstrated a robust response to pH changes, and when tested with BCC circuits, they showed that it was possible to quantize based on pH when transmitting data through the human body. This study successfully developed a novel method for SiNW fabrication and integration into BCC circuits, which could lead to improvements in the reliability and efficiency of implantable medical sensors. The findings demonstrate significant potential for bioelectronic applications and real-time biochemical monitoring.

Design of a Porous Silicon Biosensor: Characterization, Modeling, and Application to the Indirect Detection of Bacteria.

The design of a porous silicon (PSi) biosensor is not often documented, but is of the upmost importance to optimize its performance. In this work, the motivation behind the design choices of a PSi-based optical biosensor for the indirect detection of bacteria via their lysis is detailed. The transducer, based on a PSi membrane, was characterized and models were built to simulate the analyte diffusion, depending on the porous nanostructures, and to optimize the optical properties. Once all performances and properties were analyzed and optimized, a theoretical response was calculated. The theoretical limit of detection was computed as 104 CFU/mL, based on the noise levels of the optical setup. The experimental response was measured using 106 CFU/mL of Bacillus cereus as model strain, lysed by bacteriophage-coded endolysins PlyB221. The obtained signal matched the expected response, demonstrating the validity of our design and models.

Solution-Induced Degradation of the Silicon Nanobelt Field-Effect Transistor Biosensors.

Field-effect transistor (FET)-based biosensors are powerful analytical tools for detecting trace-specific biomolecules in diverse sample matrices, especially in the realms of pandemics and infectious diseases. The primary concern in applying these biosensors is their stability, a factor directly impacting the accuracy and reliability of sensing over extended durations. The risk of biosensor degradation is substantial, potentially jeopardizing the sensitivity and selectivity and leading to inaccurate readings, including the possibility of false positives or negatives. This paper delves into the documented degradation of silicon nanobelt FET (NBFET) biosensors induced by buffer solutions. The results highlight a positive correlation between immersion time and the threshold voltage of NBFET devices. Secondary ion mass spectrometry analysis demonstrates a gradual increase in sodium and potassium ion concentrations within the silicon as immersion days progress. This outcome is ascribed to the nanobelt's exposure to the buffer solution during the biosensing period, enabling ion penetration from the buffer into the silicon. This study emphasizes the critical need to address buffer-solution-induced degradation to ensure the long-term stability and performance of FET-based biosensors in practical applications.

SERS-based detection of the antibiotic ceftriaxone in spiked fresh plasma and microdialysate matrix by using silver-functionalized silicon nanowire substrates.

Therapeutic drug monitoring (TDM) is an important tool in precision medicine as it allows estimating pharmacodynamic and pharmacokinetic effects of drugs in clinical settings. An accurate, fast and real-time determination of the drug concentrations in patients ensures fast decision-making processes at the bedside to optimize the clinical treatment. Surface-enhanced Raman spectroscopy (SERS), which is based on the application of metallic nanostructured substrates to amplify the inherent weak Raman signal, is a promising technique in medical research due to its molecular specificity and trace sensitivity accompanied with short detection times. Therefore, we developed a SERS-based detection scheme using silicon nanowires decorated with silver nanoparticles, fabricated by means of top-down etching combined with chemical deposition, to detect the antibiotic ceftriaxone (CRO) in spiked fresh plasma and microdialysis samples. We successfully detected CRO in both matrices with an LOD of 94 µM in protein-depleted fresh plasma and 1.4 µM in microdialysate.

Highly Sensitive Microarray Immunoassay for Multiple Mycotoxins on Engineered 3D Porous Silicon SERS Substrate with Silver Nanoparticle Magnetron Sputtering.

A high-throughput, rapid, and highly sensitive surface-enhanced Raman spectroscopy (SERS) microarray for screening multiple mycotoxins has been developed on a three-dimensional silver nanoparticle porous silicon (3D AgNP-Psi) SERS substrate, which was easy to be engineered by electrochemical etching and magnetron sputtering technology. The etching current density, etching waveform, and target material for magnetron sputtering have been investigated to obtain an optimal 3D SERS substrate. The optimized 3D AgNP-Psi SERS substrate showed an enhancement factor of 2.3 × 107 at 400 mA/cm2 constant current density etching for 20 s and Ag target magnetron sputtering for 200 nm thickness on the surface of Psi. The simulation electric field distribution showed the near-field enhancement can reach 3× higher than that of AuNPs. A protein microarray has been designed to screen multiple mycotoxins by AuNP Raman tags and a competitive immunoassay protocol on the surface of the 3D SERS substrate. The SERS protein microarray displayed wide linear detection ranges of 0.001-100 ng/mL for ochratoxin A, 0.01-100 ng/mL for aflatoxin B1, 0.001-10 ng/mL for deoxynivalenol, along with pg/mL low limit of detection, good recovery rates, repeatability, and reproducibility. The 3D SERS protein microarray is easily engineered and has a great potential application in medicine, environment, and food industry fields.

Atypical methods for characterization of used photovoltaic panels during their pre- and Post-Thermal treatment assessment.

The study presents an innovative approach to the analysis of waste silicon photovoltaic panels prior and after thermal treatment. Using laser-induced breakdown spectroscopy (LIBS), the elemental composition of multilayered panel backsheets was determined, identifying a TiO2-containing coating laminate, a polyvinylidene fluoride (PVDF) layer, and an ethylene vinyl acetate (EVA) encapsulant, while also estimating their thickness. Identifying the fluorine-containing layers allowed their selective removal and safe processing of the used panels. Thermal processing parameters such as temperature (400-550 °C), time (5 - 60 min) and orientation of the busbar relative to the heat source were optimized based on contact angle measurements and CIELAB color space analysis, techniques used to detect organic residues in recovered glass and silicone. The decomposition process was examined by thermal analysis coupled with mass spectroscopy, which revealed that there were no volatile fluorine compounds in the gases released, although fluorine was detected on the recovered glass surface by SEM - EDS examination. After the PVDF layer was removed, fluorine compounds were not found in volatile gases or on the surface of recovered inorganic materials. The study indicated that the orientation of the busbars facilitates the decomposition of organic matter. Methods for reusing recovered secondary materials were also provided, suggesting the potential applications and benefits of recycling components from silicon photovoltaic panels.

High-performance pyramid-SiNWs biosensor for NH3gas detection.

NH3is widely existed in the environment and is closely associated with various health issues. Additionally, detecting the small amounts of NH3exhaled by patients with liver and kidney diseases offers potential opportunities for painless early disease diagnosis. Therefore, there is an urgent need for a convenient, rapid, and highly sensitive real-time NH3monitoring method. This work presents a high-performance NH3sensor based on olfactory receptor-derived peptides (ORPs) on a pyramid silicon nanowires (SiNWs) structure substrate. First, we successfully fabricated the pyramid-SiNWs structure on a silicon substrate using a chemical etching method. Subsequently, by dehydrative condensation reaction between the amino groups on APTES and the carboxyl groups of ORPs, ORPs were successfully immobilized onto the pyramid-SiNWs structure. This methodology allows the ORPs sensor on the pyramid-SiNWs substrate to detect NH3as low as 1 ppb, which was the reported lowest limit of detection, with a higher response rate compared to ORPs sensors on flat SiNWs substrates. The sensors also exhibit good sensitivity and stability for NH3gas detection. The results show the feasibility and potential applications of ORPs-pyramid-SiNWs structure sensors, in the fields of food safety, disease monitoring, and environmental protection, etc.

Target-Driven Annular DNA Walker Coupled with Electrochemiluminescent Silicon Quantum Dots for APE1 Bioanalysis.

Functional DNA walkers with substantial nanostructures have been extensively investigated; however, their stability still faces challenges when exposed to diverse nuclease in clinical biological samples, resulting in the unreliability of actual assessment. This work proposed a target-driven annular DNA walker with enhanced stability enabling the sensitive and reliable response to different concentrations of apurinic/apyrimidinic endonuclease 1 (APE1), by preparing silicon quantum dots (SiQDs) as electrochemiluminescence (ECL) emitters. Specifically, the SiQDs showed significant strong and stable ECL signals by purifying the microenvironment of SiQDs through the dialysis removal of the gel-like layers surrounding the SiQDs. The relative standard deviation (RSD) of their ECL signal had been improved 16.59 times under consecutive scanning compared to that of SiQDs without dialysis, demonstrating a significant improvement in ECL stability. Subsequently, in the presence of APE1, the designed annular DNA walker was activated to move along the numerous quenching probes within the continuous cross-based DNA orbits, which were immobilized to the SiQD-modified electrode, providing ECL readout signals. The linear range of this ECL biosensor was 1.0 × 10-13 U·µL-1 to 1.0 × 10-7 U·µL-1, and the limit of detection (LOD) was as low as 1.766 × 10-14 U·µL-1. This work provides a novel structure of a DNA walker with nuclease resistance for clinical sample detection and designs a new strategy for synthesizing SiQDs with favorable ECL performance, tremendously expanding the ECL application of SiQDs.

A novel method for layer separation in waste crystalline silicon PV modules via combined low-temperature and thermal treatment.

With the significant growth in the production and installation of photovoltaic (PV) systems, the recycling of end-of-life PV modules has become a critical concern. Thermal treatment is a promising approach to decompose all the polymer and separate different layers rapidly. However, the combustion of the backsheet can lead to the release of hazardous fluorinated compounds. This paper proposes a novel method combining low-temperature and thermal treatment to separate different layers in PV modules. This method leverages the back metallization of solar cells for PV module separation, providing a fresh separation perspective. The focus lies on investigating a low-temperature separation process, and the separation interfaces are characterized using SEM and EDS, shedding light on the separation position and physical separation mechanisms. Subsequently, the effects of different freezing temperatures, freezing times, and different laminated parts were investigated, and the processing parameters were optimized. Compared to direct thermal treatment, the proposed process eliminates the generation of hazardous fluorides and mitigates mass losses caused by thermal treatment effectively. This research provides valuable insights into the green and sustainable resource recovery of waste PV modules.

Molecular Dynamics Modeling of Pulsed Laser Fragmentation of Solid and Porous Si Nanoparticles in Liquid Media.

The production of non-toxic and homogeneous colloidal solutions of nanoparticles (NPs) for biomedical applications is of extreme importance nowadays. Among the various methods for generation of NPs, pulsed laser ablation in liquids (PLAL) has proven itself as a powerful and efficient tool in biomedical fields, allowing chemically pure silicon nanoparticles to be obtained. For example, laser-synthesized silicon nanoparticles (Si NPs) are widely used as contrast agents for bio visualization, as effective sensitizers of radiofrequency hyperthermia for cancer theranostics, in photodynamic therapy, as carriers of therapeutic radionuclides in nuclear nanomedicine, etc. Due to a number of complex and interrelated processes involved in the laser ablation phenomenon, however, the final characteristics of the resulting particles are difficult to control, and the obtained colloidal solutions frequently have broad and multimodal size distribution. Therefore, the subsequent fragmentation of the obtained NPs in the colloidal solutions due to pulsed laser irradiation can be utilized. The resulting NPs' characteristics, however, depend on the parameters of laser irradiation as well as on the irradiated material and surrounding media properties. Thus, reliable knowledge of the mechanism of NP fragmentation is necessary for generation of a colloidal solution with NPs of predesigned properties. To investigate the mechanism of a laser-assisted NP fragmentation process, in this work, we perform a large-scale molecular dynamics (MD) modeling of FS laser interaction with colloidal solution of Si NPs. The obtained NPs are then characterized by their shape and morphological properties. The corresponding conclusion about the relative input of the properties of different laser-induced processes and materials to the mechanism of NP generation is drawn.

A novel "Turn-on" fluorometric assays triggered reaction for ß-glucosidase activity based on quercetin derived silicon nanoparticles and its potential use for cell imaging.

ß-Glucosidase (ß-Gluco) is an enzyme that is crucial to numerous diseases, including cancer, and in sector of industries, it is used in the manufacturing of food. Measuring its enzymatic activity is critical for biomedical studies and other activities. Herein, we have developed a novel and precise fluorescent sensing method for measuring ß-Gluco activity based on the production of yellow-green fluorescent quercetin-silicon nanoparticles (Q-SiNPs) produced from quercetin (QN) as a reducing agent and 3-[2-(2-aminoethyl amino) ethylamino] propyl-trimethoxy silane (AEEA) as a silane molecule. ß-Gluco hydrolyzed quercetin-3-O-ß-d-glucopyranoside (QO-ß-DG) to produce QN, which was then used to produce Q-SiNPs. Reaction parameters, including temperature, time, buffer, pH, and probe concentration, were carefully tuned in this study. Subsequently, the fluorescence intensity was performed, showing good linearity (R2 = 0.989), a broad linear dynamic range between 0.5 and 12 U L-1, and a limit of detection (LOD) as low as 0.428 U L-1, which was proven by fluorescence measurements. Most importantly, various parameters were detected and characterized with or without ß-Gluco. The designed probe was successively used to assess ß-Gluco activity in human serum and moldy bread. However, the mathematical findings revealed recoveries for human serum ranging from 99.3 to 101.66% and for moldy bread from 100.11 to 102.5%. Additionally, Q-SiNPs were well suited to being incubated in vitro with L929 and SiHa living cells, and after using an Olympus microscope, imaging showed good fluorescence cell images, and their viability evinced minimal cytotoxicity of 77% for L929 and 88% for SiHa. The developed fluorescence biosensor showed promise for general use in diagnostic tests. Therefore, due to this outstanding sensing modality, we anticipate that this research can provide a novel schematic project for creating simple nanostructures with a suitable plan and a green synthetic option for enzyme activity and cell imaging.

pH Quantification in Human Dermal Interstitial Fluid Using Ultra-Thin SOI Silicon Nanowire ISFETs and a High-Sensitivity Constant-Current Approach.

In this paper, we propose a novel approach to utilize silicon nanowires as high-sensitivity pH sensors. Our approach works based on fixing the current bias of silicon nanowires Ion Sensitive Field Effect Transistors (ISFETs) and monitor the resulting drain voltage as the sensing signal. By fine tuning the injected current levels, we can optimize the sensing conditions according to different sensor requirements. This method proves to be highly suitable for real-time and continuous measurements of biomarkers in human biofluids. To validate our approach, we conducted experiments, with real human sera samples to simulate the composition of human interstitial fluid (ISF), using both the conventional top-gate approach and the optimized constant current method. We successfully demonstrated pH sensing within the physiopathological range of 6.5 to 8, achieving an exceptional level of accuracy in this complex matrix. Specifically, we obtained a maximum error as low as 0.92% (equivalent to 0.07 pH unit) using the constant-current method at the optimal current levels (1.71% for top-gate). Moreover, by utilizing different pools of human sera with varying total protein content, we demonstrated that the protein content among patients does not impact the sensors' performance in pH sensing. Furthermore, we tested real-human ISF samples collected from volunteers. The obtained accuracy in this scenario was also outstanding, with an error as low as 0.015 pH unit using the constant-current method and 0.178 pH unit in traditional top-gate configuration.

Recycling of kerf loss silicon: An optimized method to realize effective elimination of various impurities.

Photovoltaic solid waste, particularly diamond-wire sawing silicon powder (DWSSP), has emerged as a significant concern in the industry. Consequently, the recycling and reuse of such waste have become a prominent research focus. In this study, focusing on achieving direct recycling and reuse of DWSSP, the key driving factors for effective purification were identified. It was found that simply increasing the melting temperature and time was insufficient to completely remove volatile impurities, and the migration process in the melt had to be taken into consideration. Additionally, this study focused on analyzing the instability model of inter-granular grain growth and its impact on the stable migration of impurities, with particular attention to the microstructure of inter-granular micro-regions. The thermal control directional solidification technique focused on controlling the temperature gradient during the melt solidification process. This approach helped stabilize the microstructure, enhance impurity migration, and ultimately led to a more effective purification of DWSSP.

Black silicon spacing effect on bactericidal efficacy against gram-positive bacteria.

The morphology of regular and uniform arrays of black silicon structures was evaluated for bactericidal efficacy against gram-positive, non-motileStaphylococcusepidermidis(S.epidermidis). In this study, uniform and regular arrays of black silicon structures were fabricated using nanosphere lithography and deep reactive ion etching. The effects of nanomorphology on bacterial killing were systematically evaluated using silicon nanostructures with pitches ranging from 300 to 1400 nm pitch on spherical cocci approximately 500 to 1000 nm in diameter. Our results show that nanostructure morphology factors such as height and roughness do not directly determine bactericidal efficacy. Instead, the spacing between nanostructures plays a crucial role in determining how bacteria are stretched and lysed. Nanostructures with smaller pitches are more effective at killing bacteria, and an 82 ± 3% enhancement in bactericidal efficacy was observed for 300 nm pitch nanoneedles surface compared to the flat control substrates.

Biofouling potential of surface-enhanced Raman scattering-based seawater quality sensors by Ulva spp.

This study investigated the biofouling potential of surface-enhanced Raman scattering (SERS)-based sensor materials in the context of marine environments. Uncoated and monolithic commercial gold (Au) silicon nanopillar array SERS substrates, Au-coated carbon black nanoparticle (AuCB NP) substrates, uncoated and Au sputter-coated in-house SERS, and uncoated and Au sputter-coated glass controls were tested for biofouling potential using Ulva spp. as model biofouling organisms. The mean percentages of Ulva spp. zoospores that adhered per mm2 (×103) on the uncoated and coated Au silicon nanopillar array, AuCB NP, uncoated and Au sputter-coated in-house, and uncoated and Au sputter-coated glass substrates were 10.28%, 5.45%, 10.49%, 3.25%, 24.84%, 12.86% and 7.78%, respectively. Results indicated that surface properties such as hydrophobicity, roughness, Au sputter-coating and the presence of micro-refuges on nano- and microstructured substrates were critical to the biofouling formation.